DANNMAR D2-12C 12,000 lb. 2 Post Lift - Symmetric

SKU/Product #: 5175312

Dannmar

Write a review
$6,860.00
$7,810.00


Free Shipping
7-10 Business Days
Shipping Calculated at Checkout
7-10 Business Days
Power Options
Pick Up and Save

Product Description

The D2-12C is Dannmar’s closed-top model, thus providing clear floor convenience. The closed-top/clear floor two-post lift allows uninterrupted floors so that you can roll floor jacks, toolboxes, and other equipment underneath the elevated vehicle without having to travel over and bang through a floor-mounted hydraulic line panel. This lift has a big 12,000 lb. lifting capacity. This lift routes the operating hydraulic lines up and across, 14 feet height hose routing above the floor.

Dannmar’s D2-12C is loaded with features to make your lift work better. With triple-telescoping arm sets, three-stage front and three-stage rear arms this Dannmar provides greater maximum reach with minimum retraction. This strong lift system will raise just about all passenger vehicles and many heavy-duty pickup trucks. The high-speed hydraulics, free-flow, high-pressure 3/8” hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speeds. The safe and rugged D2-12C two-post lift features extended height columns for added overhead clearance, as well as an adjustable top beam to accommodate wide or narrow installation setups.

Product Features

  • Dual direct-drive hydraulic cylinders
  • Heavy-duty 1/2” aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • Dual-synchro equalization system for equal lifting
  • Padded overhead safety shutoff bar - Extended height top-beam provides greater clearance
  • Single-point safety release
  • Oversized 53” tall carriage for superior strength
  • Electric/hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating Dura-glide UHMW polyethylene bearings
  • Safety locks in each column spaced every 3”
  • Automatic arm restraints
  • 16-piece specialty adapter set includes four 6” stackable adapters, four 3” stackable adapters, four polyurethane contact pads and four frame cradle pads - Convenient storage is included for truck and van adapters
  • Triple-telescoping arms provide increased range
  • ALI Certified

Product Specifications

Capacity

Lifting Capacity: 12,000 lbs.
Max. Capacity / Front Axle: 6,000 lbs.
Max. Capacity / Rear Axle: 6,000 lbs.

Rise

A - Min. Pad Height: 4 1/4" (0.35 FT.)
C - Max. Rise (Under Arms) 69" (5.75 ft)
B - Max. Lifting Height: 80"(6.66 Ft.)
Lifting Time: 55 seconds

Outside dimensions

E - Overall Width: 155 1/4" (12.93 ft.)
D - Overall Height: 168 3/4" (14.06 ft.)

Inside Dimensions

G - Width Between Columns: 119 1/2 (9.95 ft.)
H - Drive-Thru Clearance: 105" (8.75 ft.)

Arms

Front Arm Reach: (Min) 31 1/2"(2.62 ft.)
Front Arm Reach: (Max) 58" (4.83 ft)
Rear Arm Reach: (Min) 31 1/2"(2.62 ft.)
Rear Arm Reach: (Max) 58" (4.83 ft)

Power Unit

Motor: 220 VAC / 60 Hz / Single Phase


Shipping

Weight: 2,618 lbs.
Dimensions: 177" x 29" x 40"
 

Pick Up and Delivery

Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.

Call, text, or chat with us if you have questions. 866-774-7743

Downloads

Brochure
Manual
Warranty
 
0 0 Reviews

Reviews