*Offer does not include all products. By signing up via text, you agree to receive recurring automated promotional and personalized marketing text messages (e.g. cart reminders) from Mechanic Superstore at the cell number used when signing up. Consent is not a condition of any purchase. Reply HELP for help and STOP to cancel. Msg frequency varies. Msg & data rates may apply.
The HDSO14P is an open-front four-post lift that features clear entry upfront, providing easy vehicle access. A generous 14,000-lb. lifting capacity and extended runways allow you to service a wide variety of vehicles, ranging from small cars to full-size trucks.
We engineered the HDSO14P without a front cross bar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This model is a must-have for busy alignment bays.
For precise front-lift leveling, nothing beats our patented adjustable front outrigger tubes. The infinitely adjustable pitch compensates for excessive loads and unlevel floors.
Four heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway make this lift the most durable, maintenance-free lifting system on the market.
Huge 10.5” diameter cable sheaves within the runway and cross tubes work with massive 2.25” diameter sheave axles to improve cable wear and critical component lifespan. Dual‐hub cable sheaves reduce stress, fatigue and wear. Naturally, this means a lot less money in service-related expenses down the road.
The HDSO14P is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
Each lift is supplied with four high-quality 1/2” diameter, 6 x 25 stainless steel lifting cables rated at 14,400 lbs. each. The combined rating of these cables is more than 411% of the maximum lifting capacity of the entire lift! This aircraft‐quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue. And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.
A maintenance‐free electric hydraulic power system assures ultimate dependability.
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
12” x 10” base plates provide a solid foundation for the HDSO14P.
This car lift gives you maximum grip, even when the runway surface is wet or oily.
These approach ramps were designed a little longer to help when loading low ground-clearance vehicles. It’s the little bit that makes a big difference.
Lifting cables, airlines, safety latches and sheaves are all fully enclosed.
An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
Aircraft-quality stainless steel and aluminum pneumatic cylinders release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.
14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle
7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle
7,000 lbs. (3,175 kg)
A - Min. Runway Height:
7.625" (194 mm)
B - Max. Rise:
70" (1,778 mm)
C - Max. Lifting Height:
77.625" (1,972 mm)
Time to Full Rise:
D - Overall width (FRONT)
143” (3,632 mm)
E - Overall Width (REAR)
130” (3,301 mm)
F - Outside Length
215.5" (5,473 mm)
G - Overall Length
244" (6,198 mm)
H - Height of Columns (FRONT)
105" (2,664 mm)
I - Height of Columns (REAR)
103” (2,613 mm)
J - Width Between Columns (FRONT)
123” (3,124 mm)
K - Width Between Columns (REAR)
120” (3,046 mm)
L - Drive-Thru Clearance
97” (2,464 mm)
M - Runway Width
20" (508 mm)
N - Length of Runways
199" (5,054 mm)
O - Width Between Runways
45" (1,143 mm)
P - Runway Centerline
65" (1,651 mm)
Q - Outside Edge of Runways
85" (2,159 mm)
140" (3,556 mm)
120" (3,048 mm)
100" (2,540 mm)
80" (2,032 mm)
Every 4" (102 mm)
220 VAC / 60 Hz / 1 Ph
3,099-lbs. (1,405 kg)
220'' x 24'' x 39'' (5,588 mm x 690 mm x 990 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Will Call Locations for AMGO are located in South Carolina, Michigan, and Southern California. Call or Text us for details.
Will Call Location for Stratus in College Station, Texas.
Click here to view all delivery options available. Call, text, or chat with us if you have questions.