Product Description
The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.
More Height in Less Floor Space
The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.
With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
Product Features
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Narrow-width
- High-rise
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric-hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
Product Specifications
Capacity
| Lifting Capacity: | 9,000 lbs |
| Max. Capacity / Front Axle: | 4,500 lbs |
| Max. Capacity / Rear Axle: | 4,500 lbs |
Rise
| A - Minimum Height | 4 1/2" (0.375 ft.) |
| B - Max. Rise (Under Runway) | 82" (6.83 ft.) |
| C - Max. Lifting Height: | 86 1/2" (7.20 ft.) |
| Lifting Time: | 50 Seconds |
Outside Dimensions
| D - Overall Width: | 110 1/4" (9.18 ft.) |
| F - Overall Length (Inc.Ramps) | 224" (18.66 ft.) |
| E - Overall Length (No Ramps) | 198" (16.5 ft.) |
Inside Dimensions
| H - Width Between Columns: | 89 3/4" (7.47 ft.) |
| I - Drive-Thru Clearance | 76 1/2" (6.375 ft.) |
Runways
| J - Runway Width | 19" (1.58 ft.) |
| K - Runway Length | 188" (15.66 ft.) |
| L: Width Between Runways | 37 1/2" (3.125 ft.) |
Locking
| Locking Positions: | 15 |
| Lock Spacing: | Every 4" |
Power Unit
| Motor: | 220 VAC / 60 Hz / 1 Ph |
Shipping
| Weight: | 1,782 lbs |
| Dimensions (LxWxH): | 190" x 22" x 35" |
Pick Up and Delivery
Our Pick Up locations for Bendpak/Dannmar/Ranger are located in Santa Paula, California & Theodore, Alabama.
Call, text, or chat with us if you have questions.
Downloads
Brochure
Manual
Warranty
